







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Homestead Owner’s Guide
We install ES Windows-compatible driveway and paver systems in Homestead, and a full paver driveway typically runs $7,000 – $18,000 installed, while concrete driveway replacement lands at $5,000 – $14,000. Paver patios start at $3,500 and go to $11,000. Most owners discover a failing surface the same way: a hairline crack that widens after a rainy season, a settling dip at the apron where the driveway meets the street, or pavers that heave and rock when the afternoon sun bakes the slab.
This guide is written for owners of ES Windows products who need the paver or driveway component matched correctly, priced honestly, and installed by people who know what South Florida weather does to a base. We are an independent service provider and are not affiliated with ES Windows.
Which ES Windows Models This Applies To

ES Windows built its reputation on impact-rated window and door systems, and the driveway and paver components tied to those systems vary by product line and installation era. The compatibility question matters most at the perimeter: paver borders that abut a window well, apron transitions at a garage slab, and drainage swales that direct water away from the threshold. An ES Windows installation from the mid-2000s often used a narrower paver border than a 2019 build, and a mismatched border creates a water trap against the wall.
To identify what you need, look for the manufacturer label on the window frame or the original installation paperwork. Measure the paver module depth (standard is 60mm for driveways, 80mm for heavier loads) and the border width in inches. For OEM versus aftermarket, the honest answer for Homestead is that quality aftermarket pavers from Belgard or Techo-Bloc outperform discontinued ES-branded stock on both durability and lead time. We source through fifty-plus vetted brands, so the written quote reflects real numbers, not inflated ones. If you have KraftMaid, Cambria, or Silestone elements elsewhere in the home, we service those too.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
- Heaving and rocking pavers. The base layer has lost compaction or water is trapped under the sand joint. This shows up first in the wheel tracks, where load pressure is highest.
- Hairline cracks that widen seasonally. Miami-Dade’s limestone base and high water table cause slab movement that a thin pour cannot resist. Cracks wider than a credit card mean the subgrade is failing.
- Ponding at the apron or threshold. A slope of less than 2 percent sheds water too slowly for Homestead’s summer downpours. Standing water against a window well accelerates rot and efflorescence.
- Joint sand washing out. Polymeric sand breaks down faster in high humidity and UV exposure. Missing sand lets weeds establish and lets water reach the base.
- Efflorescence or white chalky bloom. This signals moisture moving through the paver and depositing salts on the surface. It is cosmetic until it is not; persistent bloom points to a drainage problem underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Homestead, a paver driveway installation runs $7,000 – $18,000, concrete driveway installation $4,500 – $12,000, asphalt paving $3,500 – $9,000, and full driveway replacement $5,000 – $14,000. Paver patio installation is $3,500 – $11,000 and driveway sealing is $250 – $700. The range is driven by square footage, base depth, removal of the existing surface, and whether drainage corrections are needed.
Every quote is a flat written price with a written scope before work begins, and no change proceeds without a signed change order. That discipline has kept our projects within a few percent of the agreed cost across 4,000-plus jobs since 2007. The 365-Day Done Right Promise covers the workmanship, and you receive a documented photo record of what we found and what we installed on every visit. Call (844) 834-4248 for a free estimate.
DIY or Call Us?
An owner can safely inspect and document: measure border width, photograph cracks, check for rocking pavers, and confirm the window label. What goes wrong with DIY on this work is the base. Paver driveways fail because the subgrade was not compacted to the right density or the slope was set by eye, and correcting that means removing everything above it. Resetting a single paver is a weekend job; rebuilding a driveway base is not.
If water is pooling against a window well or threshold, stop and call us rather than dig. Water intrusion into a wall cavity compounds fast in Homestead humidity.
Call (844) 834-4248 to schedule your free estimate. Bring a competitor’s quote and we will review it line by line at no charge through our Free Second Opinion offer.
FAQs

How long does an ES Windows driveway and paver system last in Homestead? A properly based paver driveway lasts 25 – 30 years in South Florida; concrete typically gives 20 – 25 years before significant cracking. The base and drainage matter more than the surface material.
Can a failing driveway be repaired instead of replaced? Yes, if the failure is isolated. Spot repairs and re-sanding fix localized issues; widespread heaving or subgrade failure means replacement. We tell you which one you have in the written scope.
How long does the swap take? A typical paver driveway installation in Homestead takes 3 – 5 days including removal and base prep. Small patios finish in 2 – 3 days.
How do you source the part? We match the paver module and border to your existing installation through fifty-plus vetted brands including Belgard and Techo-Bloc. The written quote names the exact product before work starts.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












