







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Homestead Owner’s Guide
We install ES Windows-compatible kitchen remodeling in Homestead, and the honest starting number is $14,000 – $45,000 for a full kitchen, with small kitchens running $9,000 – $20,000. If you’re here because a specific ES Windows product in your kitchen has failed, that’s a different conversation, and this page is built for it: we match the failed part to your unit, quote it in writing, and install it without guesswork. Homestead homeowners usually discover the problem the same way, a window that won’t latch after a storm, a sliding door that jumps its track, or water staining the sill under a kitchen window after a heavy summer squall.
Which ES Windows Models This Applies To

ES Windows builds to Florida product approval standards, which matters more in Homestead than almost anywhere else in the state. Miami-Dade and Broward sit in the High Velocity Hurricane Zone, and much of southern Miami-Dade County, including Homestead, gets hit with wind-load requirements that dictate the glass thickness, frame reinforcement, and impact rating of every opening. That means the exact series matters. A part pulled for a standard single-hung unit will not fit an impact-rated ES Windows unit of the same nominal size, because the sash weight and frame extrusion are different.
The label is your first stop. Look on the frame head or the sash edge for the manufacturer’s sticker, which usually carries the model designation and a Florida product approval number (something like FL followed by digits). Photograph it before you call anyone, including us. If the sticker is gone, we measure the rough opening, the sash height and width, and the glass make-up, and we match from there.
On the OEM-versus-aftermarket question for ES Windows specifically: the OEM route guarantees a fit but can carry a lead time that doesn’t suit a kitchen mid-renovation. A quality aftermarket equivalent, matched to the same product approval spec, is often the faster answer and the cheaper one. We source across more than fifty vetted brands, including ES Windows-compatible hardware lines alongside KraftMaid, Cambria, and Silestone for the cabinetry and countertop side of the job, so we can give you an honest comparison rather than a single number.
One note on who we are: Rowan Construction Group Homestead is an independent service provider. We are not affiliated with ES Windows, and we don’t claim to be. We work with their products because they’re common in South Florida homes built and renovated between 2000 and 2020, and we know how they fail.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Kitchen Remodeling Is Failing
- The window won’t seat or latch fully. In Homestead, this usually traces to a swollen or warped sash from humidity cycling, not a broken lock. The lock is doing its job; the frame has moved.
- Water tracks across the interior sill after rain. Weep holes clogged with debris or a failed perimeter seal. Left alone, that moisture reaches the wall cavity behind your kitchen backsplash and cabinet run.
- The sliding glass door drags or jumps the track. Typically a worn roller assembly or a track that’s collected grit and mineral buildup. Rollers are a serviceable part; a bent track is a bigger job.
- Fogging between the panes. Seal failure in the insulating glass unit. The window still keeps out wind and rain, but it’s lost its thermal value, and in a Homestead kitchen that shows up as heat gain near the cooking zone.
- Drafts or condensation at the frame edge. Usually a failed weatherstrip or gasket, or a frame that’s shifted. On impact-rated units, a compromised gasket is a wind-load concern, not just a comfort one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like in Homestead, with labor and materials together. A full kitchen remodel, if you’re combining window and door replacement with cabinetry and counters, runs $14,000 – $45,000. Smaller kitchens land at $9,000 – $20,000. Cabinet installation runs $4,000 – $13,000, countertops $2,000 – $6,500, a backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. On the window side specifically, impact window installation runs $8,000 – $25,000 and standard window replacement $4,500 – $15,000, depending on count and size.
What moves the range: the number of openings, whether you’re going impact-rated (which Homestead code often requires), the condition of the surrounding framing, and finish level. We quote a flat written price with a written scope before any work starts, and no change proceeds without a signed change order, which is Clause 1 of The Haven Standard and the reason our projects finish within a few percent of the agreed number. Workmanship carries our 365-Day Done Right Promise.
DIY or Call Us?
There’s a safe split here. An owner can photograph the product label, measure the rough opening, clear debris from weep holes, and clean and lubricate a sliding-door track. Those are reasonable.
What we don’t recommend is sash replacement, glass swap on an impact-rated unit, or frame resealing on a second-story or structurally framed opening. Impact glass is heavy, and a unit that isn’t seated correctly can fail under wind load, which in Homestead is a genuine safety issue, not just a leak. If the frame has moved or the glass is compromised, bring in a trained professional. Call (844) 834-4248 and we’ll give you a straight read on what’s actually failed before anyone sells you a whole window.
FAQs

Expect 20 to 30 years from the frame and 10 to 20 from the sealed glass unit, though South Florida’s sun and humidity put you at the shorter end. The insulating seal typically fails first, long before the frame does. If your glass is fogging, the unit is past its useful thermal life. Call (844) 834-4248 for an exact quote, estimates are free.
Often yes. Rollers, locks, weatherstrip, and gaskets are serviceable individual parts, and replacing one is far cheaper than swapping a whole unit. A fogged glass unit or a frame that’s shifted usually means replacement. We’ll tell you which situation you’re in, in writing, before you commit to anything.
A single serviceable part like a roller or lock is a short visit, often under an hour. A glass unit or full sash replacement typically runs half a day per opening. Full kitchen remodeling is a scheduled project, not a same-day job, and we’ll give you the timeline in the written scope, not a verbal promise.
We start with your product label and approval number, then measure the rough opening to confirm the match. From there we compare the OEM part against a vetted aftermarket equivalent at the same spec, and you get both numbers in writing. We don’t stock parts locally or carry them on a truck, so we’re sourcing to your unit, not selling you what happens to be on hand.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.
Ready to price it? Call (844) 834-4248 for a free estimate, and bring any quote you already have, we’ll review it line by line at no charge.












