







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose ES Windows Construction
We provide independent ES Windows construction, repair, and installation service across Homestead, and we are not ES Windows dealers or factory-authorized. What sets our ES Windows work apart is documentation: every opening is specified by Miami-Dade NOA number, not by what a unit looks like, and every price is written down before a tool comes out of the bag. If you own ES Windows impact-rated aluminum single-hungs, horizontal sliders, sliding glass doors, or vinyl replacement series, we work on them every week in this market.
Homestead is reshaped by Hurricane Andrew and the post-Andrew Florida Building Code, the toughest wind-load framework in the country. Nearly every window and door project here gets measured against impact glazing, roof-to-wall connections, and wind mitigation. Call (844) 834-4248 to schedule your free estimate.
Why Trust Rowan Construction Group Homestead for Your ES Windows Construction?

Our technicians have up to 19 years of experience, and that experience lives in the details of ES Windows product lines, not just in general contracting. They know how the tandem roller assemblies sit in an ES Windows aluminum slider track, how the corner gaskets and pile weatherstrip fit along the jamb, and how an IGU changes the reported opening size in a NOA document. That familiarity is what keeps a repair honest and warranty-safe.
We use OEM-compatible parts where the series is still in production, and we say so when a part is aftermarket. A factory profile that does not match the extrusion is worse than a matched aftermarket profile. On the warranty side, we avoid practices that void coverage: no drilling new anchor holes outside the manufacturer’s pattern, no substituting glass with a lower impact rating than the unit’s NOA calls for, and no sealant that is not Miami-Dade listed for the application.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. Every visit includes a documented photo record as standard, so you can see the condition of the weatherstrip, the rollers, and the perimeter joint before we recommend anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ES Windows Construction Problems We Fix in Homestead
Subtropical heat, salt air off Biscayne Bay, and the June-to-November storm season wear ES Windows units in predictable ways. These are the five calls we get most in Homestead.
- Pile-weatherstrip failure in sliders. The wool-pile seal in ES Windows horizontal sliders flattens after years of sun and humidity, and wind-driven rain sneaks past the jamb during a squall. You find water on the interior sill or a faint trail across the drywall under the head. Re-piling the jamb and sill usually closes the gap.
- Roller and track wear. Tandem rollers in ES Windows aluminum sliders lose their radius and start to drag. Once a panel racks in the frame it stops meeting the strike, lifts in the guide, and the weather seal misaligns. We reset or replace the roller assemblies and realign the panel in the track.
- Perimeter sealant and glazing-bead degradation. UV and salt-laden coastal air break down the sealant joint and glazing bead. You see fogged IGU units, a silvering haze between the panes, or water staining inside the head. Re-glazing the unit and re-sealing the opening with a listed sealant fixes both the appearance and the leak.
- Corrosion on thresholds and fasteners. ES Windows aluminum thresholds and anchor fasteners pit and oxidize near the coast. When the pitting reaches the anchor line, the frame no longer holds the mullion connection and the weather seal loses tension. Cosmetic touch-up does not solve that.
- Loosening mullion connections in window walls. Multi-unit mulled assemblies in ES Windows picture-window and slider combinations work loose as the anchor points corrode. A rattle or a widening seam between units is the signal. Torquing the mullion fasteners and replacing compromised anchors restores the assembly’s wind-load capacity.
ES Windows Parts & Our Repair-vs-Replace Approach

Parts for ES Windows work arrive one of two ways. Where the series is in production or the profile is still stocked, we use OEM rollers, pile weatherstrip, corner gaskets, and glazing bead that match the extrusion. Those parts are not on a shelf here; we source them per job after diagnosis.
Where OEM is gone, a matched aluminum profile and impact-rated glass assembly are specified by NOA number rather than swapped blindly. That distinction matters in Homestead, where a NOA’s design pressure and impact rating control the repair.
How we decide repair versus replace: if the frame is sound past the anchor line and the weather seal can be restored, we repair. If the frame is corroded through the anchor line or the mullion connections cannot be made reliable, we price replacement and say the cosmetic repair is not worth the money.
Call (844) 834-4248 for an exact quote. Estimates are free, and we will walk a competing written estimate line by line with you at no charge.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We pull the panels, inspect the roller assemblies, pile weatherstrip, glazing bead, and perimeter sealant, and check the anchor and mullion fasteners. The photo record is taken here.
- 2
Written price and scope. Under Clause 1, the flat price and written scope are delivered before any work starts. No change proceeds without a signed change order.
- 3
Repair or install. We reset or replace rollers, re-pile the jamb and sill, re-glaze failed IGUs, and re-seal with a Miami-Dade-listed sealant. New installation follows the NOA anchor pattern and flashing detail.
- 4
Test. Sliders are cycled, checked for square and strike alignment. We confirm drainage weep holes are clear and verify the impact rating against the NOA on the opening.
- 5
Warranty and record. You receive the written warranty and the documented photo record. The 365-Day Done Right Promise covers the work: if it is not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Homestead
We work on the ES Windows lines you find across Homestead: impact-rated aluminum single-hung and horizontal slider unit lines, fixed picture-window and mulled window-wall assemblies, aluminum sliding glass doors and multi-panel sliders, and the vinyl-frame replacement window series used in older Homestead subdivisions. Each opening is assessed against the series it belongs to, because the parts, weatherstrip profile, and NOA documentation differ from one line to the next.
We Also Service These Brands
ES Windows is one line in a broader practice. We also service and install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures and plumbing. That multi-brand depth means a window decision gets weighed against the rest of the envelope, not held hostage to a single distributor’s inventory.
FAQs – ES Windows Construction Service in Homestead

Is Rowan Construction Group Homestead authorized by ES Windows? No. We are an independent ES Windows service provider and are not affiliated with, authorized by, or sponsored by ES Windows. We work on ES Windows products because we know the lines and the documentation, not because a factory sent us.
Do you use genuine ES Windows/OEM parts? We use OEM parts where the series is in production or the profile is still stocked, and matched aftermarket profiles specified by NOA number where OEM is unavailable. We tell you which you are getting before the work starts.
How long does ES Windows service take? Most single-opening repairs, such as roller and weatherstrip replacement or re-glazing a failed IGU, are one-day jobs. Full window-wall work or multiple replacements run longer. Call (844) 834-4248 and we will give you a written scope with a time estimate.
What ES Windows models/series do you cover? Impact-rated aluminum single-hung and horizontal sliders, fixed picture windows and mulled window walls, aluminum sliding glass and multi-panel slider doors, and vinyl-frame replacement window series.
Will service void my ES Windows warranty? Not when the work is done correctly. Using OEM-compatible parts, following the NOA anchor pattern, and using listed sealants keep coverage intact. Improper substitution or out-of-pattern fasteners can void it, which is why we document each step.
How much does ES Windows construction cost in Homestead? Impact window installations run $8,000 to $25,000, window replacement runs $4,500 to $15,000, and roof repair tied to window work runs $400 to $1,800. Call (844) 834-4248 for an exact quote; estimates are free.
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Book Your ES Windows Service in Homestead, FL
If you have an ES Windows slider that leaks, a fogged IGU, or a frame near the end of its life, we will give you a written price and a written scope before any work starts. Crews are background-checked and uniformed, and a live person answers calls. Call (844) 834-4248 for a free estimate.
Written by the team at Rowan Construction Group Homestead.












