







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Homestead Owner’s Guide
Bathroom remodeling in Homestead with IKO materials typically lands between $9,000 and $28,000 installed, depending on the wet area’s size, tile run, and fixture package. Smaller bathrooms fall in the $5,000 to $12,000 band. A walk-in shower alone runs $4,500 to $12,000, and a tub-to-shower conversion is $3,500 to $10,000. We’re an independent contractor and not affiliated with IKO; we work with their tile and waterproofing products when the owner wants them or when they already exist in the home.
The reason most Homestead owners find us is a bathroom that’s already failing: a soft spot under the toilet, grout that won’t stay put, or a shower pan that seeps after every use. That’s usually a substrate or waterproofing problem, not a surface one. Read on for what actually fails, what’s worth replacing, and what it costs in this market.
Which IKO Products This Applies To

IKO is best known in South Florida for roofing, but their waterproofing membranes and tile underlayment products also turn up in bathroom work. If your home has an IKO membrane under the tile or in the shower pan, the parts page that matters is the underlayment and drainage assembly, not just the tile.
Identifying the right product starts with the label. IKO underlayment rolls are marked on the core with the product line and thickness; if the label is gone, measure the roll width (most are 39.4 inches) and check the home’s build date. Florida homes built in the 1990s and 2000s often used a thin, paper-faced underlayment that doesn’t hold up to Homestead’s humidity the way modern bonded membranes do.
The OEM-versus-aftermarket call is simpler than it sounds. IKO-branded underlayment is worth specifying when the original build used it and you want continuity; a quality equivalent (Schluter’s Kerdi or a comparable bonded membrane) performs similarly and is often easier to source. What matters more than the brand is the install: full coverage, correct overlaps, and a flood test before tile. We also work with KraftMaid, Cambria, and Silestone when the remodel brings in cabinets and counters, and we quote each line in writing before anyone touches the shower.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
These are the symptoms Homestead owners call about most often. Each points to a specific failure, and knowing which one you have tells you what the estimate will cover.
- Grout cracking along the shower floor in a straight line. That pattern usually means the membrane underneath has failed or was never installed to spec, letting water into the mud bed.
- A soft or spongy spot at the toilet base or along the tub apron. Wood subfloor swelling from chronic moisture. Once it’s soft, the tile above it has to come up to fix the framing.
- Peeling or bubbling paint on the wall opposite the shower. Water is migrating through the wall assembly. The source is almost always the shower or tub surround, not the paint.
- Mold returning at the caulk lines within weeks of cleaning. A ventilation and moisture-trapping problem, common in Homestead’s wet season when bathroom exhaust runs less.
- Water staining on the ceiling below, or on a wall in the room next door. The most serious sign. It means the leak is active and the substrate is saturated.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for Homestead, quoted as a flat price with a written scope before work begins. That’s the whole point of how we price.
| Scope | Installed Price |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
The low end assumes a standard footprint, stock tile from a local supplier, and no hidden rot behind the wall. The high end covers a layout change, custom tile work, a full waterproofing rebuild, or moving plumbing. Every quote lists parts, labor, and permit costs separately, so you can see what drives the number. Under the 365-Day Done Right Promise, if something we touched fails within a year, we make it right at no charge. And if the inspector finds a code issue, that gets handled by us, not left to you.
DIY or Call Us?
You can safely check for signs of failure yourself: look for soft spots, run the shower and watch what the wall below does, and check the caulk line for movement. What you shouldn’t do is pull back tile and tear into a waterproofing layer to see what’s underneath. Once that membrane is breached, water can get into the wall cavity and the fix gets more expensive by the day. Patching tile over a failed membrane is how small leaks become subfloor replacement, and it hides the problem from whoever inspects next.
The same goes for any electrical work at a bathroom vanity or a relocated outlet. That’s a licensed-electrician call, not a weekend job, and we bring the right people in under the same written scope. If you’ve already pulled a tile up and found something ugly under it, stop there and call us at (844) 834-4248. A free second opinion on any estimate you’ve already got is available, reviewed line by line.
FAQs

A properly installed membrane should protect the bathroom for 20 to 30 years. In Homestead, the humidity and wet-season cycling cut that short when ventilation is poor. If the original underlayment is 15 years old and you’re seeing cracks or softness, it’s already past its reliable life in this climate.
Call (844) 834-4248 for an exact quote – estimates are free, and we’ll tell you honestly whether it’s a fix or a rebuild.
Sometimes, but rarely in a wet area. Grout and caulk can be refreshed if the failure is surface-only, and a shower drain gasket can sometimes be replaced without tearing out tile. Once water has reached the subfloor or the framing, patching over it just pushes the cost down the road. We’d rather show you the photo record of what we found than guess.
Call (844) 834-4248 and we’ll schedule a free estimate.
A shower replacement runs 3 to 5 working days, and a full bathroom remodel runs 2 to 4 weeks. The range depends on whether we’re moving plumbing, waiting on tile delivery, or discovering rot behind the wall.
Call (844) 834-4248 and we’ll put the schedule in your written scope before you commit.
We identify the existing product through the manufacturer label, roll dimensions, and a physical check of the assembly, then spec a replacement that matches the original install or improves it. Where IKO is not the right product for the job, we’ll say so and show you the alternative in the written quote. We quote flat prices on every line and won’t begin work without a scope you’ve signed.
Call (844) 834-4248 for a free estimate and a written price you can hold us to.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












