







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Home Additions & ADU: The Homestead Owner’s Guide
We build James Hardie-clad home additions and ADUs in Homestead at an installed price of $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU, with a written flat price and written scope before any work starts. Cladding is the part of the build most often tied to a failure call: James Hardie fiber cement is a durable skin, but the system around it – the caulk joints, the flashing, the fasteners, the paint coat – is what ages first. By the time a Homestead homeowner calls us, the symptom is usually a hairline crack running out from a window corner, a soft spot in the trim below a roofline, or paint flaking off in sheets along the sunny face of the structure.
Which James Hardie Models This Applies To

James Hardie names its fiber cement lines clearly, and the product on your addition or ADU will be one of a handful. HardiePlank lap siding, HardiePanel vertical siding, HardieShingle in staggered or straight-edge, HardieTrim boards in sizes running from 3.5 in. to 11.25 in., and HardieSoffit panels are the standards on residential work. The best way to confirm what you have is to check the paper label James Hardie prints on the back or edge of every board at the time of manufacture – it carries the product name, the nominal dimensions, and the batch code. If the label is gone, measure the actual thickness: HardiePlank comes in 5/16 in. and 7/16 in. profiles, and the difference matters because your new board and your existing board need to sit at the same plane.
The OEM-versus-aftermarket decision on this product is less complicated than it is on mechanical parts. James Hardie makes the boards; the accessories around them (flashing, corners, caulk compatible with fiber cement, stainless fasteners) come from multiple suppliers. For cladding itself we match the James Hardie spec, because HardieTrim and HardiePlank are engineered as a system and mixing in a different fiber cement brand at the trim layer is where callbacks start. For the flashing and fasteners, a good-quality aftermarket part done to code is a normal and correct choice. We’re an independent construction contractor, not affiliated with James Hardie, so we name what fits rather than what’s sitting in a warehouse.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Home Additions & ADU Is Failing
- Hairline cracks radiating from window and door corners. These usually start as a fastening problem – nails set too tight against the board, or the wrong nail type – and the crack opens as the board moves with Homestead’s heat cycles.
- Caulk joints pulling away from trim and corner boards. The caulk failed, not the siding. Fiber cement expands and contracts with the surface temperature, and caulk that isn’t rated for that movement opens up within a couple of seasons.
- Paint flaking or chalking on the sun-facing wall. Homestead’s UV load is hard on the factory primer coat, and once the finish paint starts to fail, the fiber cement begins absorbing moisture at the cut edges.
- Soft spots or swelling at the bottom edge of the board, near the ground. Usually a drainage or clearance problem – the board sitting too close to grade or the weep screed blocked – and water finding its way behind the cladding.
- Staining below a roof-to-wall transition or deck ledger. That pattern almost always traces to failed flashing, not to the James Hardie panel itself, and it needs to be opened up and inspected before new boards go on.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we quote in Homestead for the work this page covers:
| Scope | Installed Price Range |
|---|---|
| Home addition (James Hardie-clad) | $45,000 – $130,000 |
| ADU construction (attached or detached) | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
Those numbers are flat prices with a written scope – not a “starting at” figure that grows once the wall is open. What moves you toward the top of the range: adding a bathroom or kitchen hookup inside the ADU, impact-rated windows and doors for Homestead’s wind zone, a new roof tied into the existing structure, and site work such as slab removal or a utility trench. What keeps you near the bottom: a simple rectangular footprint, an existing slab or foundation to build on, and cladding that matches what’s already on the house. Every quote comes with the 365-Day Done Right Promise and a written workmanship warranty, and no change proceeds without a signed change order. Call (844) 834-4248 for a free estimate.
DIY or Call Us?
Some of what’s on this list you can safely check yourself. Walk the perimeter with a ladder and look for cracks, soft spots, staining patterns, and caulk joints that have opened up. Photograph what you see and note which wall it’s on. That record is useful when you call.
What we’d steer you away from is opening up a wall, pulling cladding off to inspect flashing, or attempting to re-secure a panel. Fiber cement is heavy, the cuts create silica dust that needs proper respiratory protection, and the moment you remove a board you’re exposing the weather-resistive barrier to Homestead’s rain and humidity. If you find water behind the cladding, the fix is structural, not cosmetic, and it needs to be handled by someone who can read what’s under the surface. Call (844) 834-4248 and we’ll take a look – the estimate is free.
FAQs

James Hardie rates its lap and panel products for decades of service, but the number that matters in Homestead is the recoat interval on the finish paint – plan on repainting every 8 to 12 years here, sooner on a west-facing wall that takes the late sun. The board itself holds up well; the coating and the caulk joints are what determine how the assembly performs.
Yes, and we do it regularly. If the damage is contained to one elevation and the flashing and weather barrier behind it are sound, we match the panel, tie into the existing joint, and recoat the repaired area. Call (844) 834-4248 for a free inspection so we can tell you which situation you’re in before you commit to anything.
A home addition typically runs several months from permit to final inspection, and a full ADU longer. Garage conversions are shorter. We give you a written schedule with the written price, and you’ll receive a documented photo record on every visit so you can see what was done even when you weren’t home.
We source James Hardie cladding through authorized distribution and match the accessory items – flashing, fasteners, compatible caulk – to the manufacturer’s spec for your climate. If a specific HardieTrim profile is back-ordered, we tell you the lead time before we start rather than promising a date we can’t hold. Kitchen and interior finishes on the same build come from our vetted brand list, including KraftMaid, Cambria, and Silestone.
We’re Rowan Construction Group Homestead, and we’re ready to put a written number in front of you. Call (844) 834-4248 for a free estimate on your James Hardie-clad addition or ADU in Homestead.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












