







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Homestead Owner’s Guide
We install and repair Jerith-compatible aluminum fencing, gates, and the paved aprons and borders that tie a Jerith driveway edge together in Homestead, and most of that work runs $7,000 – $18,000 for a full paver driveway or $3,500 – $11,000 for a paver patio. Fence-line and gate-adjacent paver repair is a smaller job, and we can usually get a written price to you within a day of the first call. Rowan Construction Group Homestead is an independent contractor and is not affiliated with Jerith; we service the products, we don’t manufacture them.
Owners rarely discover a paving or edging problem all at once. It starts with a gate that drags two inches before it latches, or a paver course along the Jerith post line that rocks underfoot after a rain. Then the sand joints wash out, or the aluminum post baseplate lifts a hair from the concrete footing. By the time most Homestead homeowners call us, they’ve already pushed the gate open with a shoulder once too often and want the number before they want the crew.
Key Takeaways
- Jerith is an aluminum fence and gate brand; “driveway and pavers” on a Jerith property means the paved apron, gate-approach, and border that integrate with the fence line.
- Installed paver driveway work in Homestead: $7,000 – $18,000. Patio: $3,500 – $11,000. Smaller gate-approach and border repairs sit well below those floors.
- Salt air, high water tables, and afternoon storm runoff are what kill paver beds and fence footings here, not the pavers themselves.
- Our technicians bring up to 19 years of experience, and every written price is flat and delivered before work starts.
Which Jerith Models This Applies To

Jerith builds aluminum ornamental fencing and gates across several residential lines – the differences show up in picket spacing, rail height, and post cap style, not in the paver work itself. What matters for the driveway and pavers side is the geometry: post spacing along the run, footing depth, and whether the fence line sits on a concrete curb, a paver border, or bare ground. Measure the run between post centers before you call anyone. Standard residential aluminum runs sit on 6-foot centers with posts at the corners and gate posts heavier than line posts – those heavier gate posts are the ones that lift when the paver bed underneath them drops.
To identify what you have, look for the manufacturer label on the inside of a post or under a rail cap, and note the picket spacing in inches. That tells you which Jerith series you’re working with. On the paver side, the OEM-versus-aftermarket question is simpler than it sounds: Jerith doesn’t make pavers, so you’re matching the paver to the existing course – color, thickness (usually 2-3/8 inch for a standard interlocking unit, 3-inch for a heavy-traffic apron), and joint sand. We source through the same vetted supplier network we use across fifty-plus brands, and we won’t quote a mismatch to save a dollar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
Here’s what failure actually looks like on a Homestead property, and what’s underneath each symptom.
- The gate drags or won’t latch cleanly. The gate post has settled or the paver bed has dropped under the hinge side. Aluminum doesn’t bend easily; it’s almost always the ground that moved, not the gate.
- Pavers rock or heave along the fence line. Water is pooling at the base of the posts and washing out the bedding sand. Homestead’s high water table and flat lots make this common after a wet season.
- Sand joints wash out after storms. Afternoon storm runoff scours the joints between pavers, and once the sand is gone the pavers start to shift and chafe against each other.
- Efflorescence – white chalky haze on the pavers. Moisture moving up through the concrete or the paver bed leaves mineral deposits on the surface. It’s a sign of a drainage problem, not a dirty driveway.
- Post baseplates lift or the footing cracks. Salt air corrosion and a shallow footing combine to push the baseplate off the concrete. Left alone, the fence run loses its anchor and the gate goes with it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Homestead property, here’s what the paver work around a Jerith installation runs. Prices are installed – parts, labor, and cleanup included.
| Scope | Installed price range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement (existing torn out) | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What moves the range: square footage, paver type and thickness, how much base has to come out and be replaced, and whether the gate footing needs re-pouring. Repairs at the gate approach and fence border – re-bedding pavers, re-pointing joints, resetting a baseplate – are quoted line by line after we see the site. The quote is flat, with a written scope and a written warranty, and no change proceeds without a signed change order. If you already have a written estimate from another installer, we’ll review it line by line at no charge – that’s the Free Second Opinion standing offer, and it applies to paver work the same as anything else we do.
DIY or Call Us?
You can safely check a few things yourself: measure the post spacing, note the gate’s drag, photograph the washed-out joints, and confirm whether the baseplate has lifted off the footing. That’s useful information and it helps us quote accurately from the start. Where DIY goes wrong is the base work. Pulling up a paver course and rebuilding the bed sounds simple until the footing under a Jerith post is exposed – a fence gate carries real load at the hinge, and a shallow or cracked footing that gets backfilled wrong will drag again inside a season. Re-hanging a heavy gate on a lifting post is a two-person job, and doing it alone risks the gate coming down on you or the post pulling out of the ground. Call us at (844) 834-4248 and we’ll come out, look at what you’ve got, and give you the number in writing before anyone touches a paver.
FAQs

How long do the pavers around a Jerith installation last in Homestead? Quality concrete pavers last 25 years or more; the bed and joint sand underneath them are what need attention, and in Homestead’s wet climate expect to re-sand joints every 3 – 5 years and check the gate footing at the same time. Call (844) 834-4248 and we’ll look at yours and tell you what it actually needs.
Can the gate or paver repair be fixed instead of replaced? Yes, most failing gate and paver situations are repair jobs, not replacements – re-bedding a course, resetting a baseplate, or re-pointing joints typically solves it. We’ll tell you plainly in the written quote whether repair or replacement is the better spend, and we don’t push replacement when repair will hold.
How long does the repair take? A gate-approach or paver-border repair is usually a one to two-day job once we’re on site, and a full paver driveway replacement runs several days depending on square footage and base work. We’ll put the timeline in the written scope so you know what to plan for.
How do you source the Jerith-compatible parts and matching pavers? We source through our vetted supplier network, matching the paver to your existing course by color, thickness, and joint sand, and matching the Jerith gate hardware to the series we identified from your label and measurements. You’ll see the part numbers and paver specs on the quote before you approve anything.
We also handle KraftMaid, Cambria, and Silestone products elsewhere in the home – mention it when you call and we’ll route it to the right trade.
Ready to stop shouldering the gate open? Call (844) 834-4248 for a free estimate on your Jerith driveway and paver work in Homestead. The price is written before any work starts, the photo record of what we found and what we did comes with the visit, and the 365-Day Done Right Promise stands behind the finished job. Background-checked, uniformed technicians, a live person on the line any hour, and a written price you can screenshot and compare – that’s the Haven Standard, on every job, every time.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












