A Rowan company - serving Homestead, FL
A remodeled primary bathroom with a soaking tub and a walk-in shower
K
Kohler · Homestead

Kohler Home Additions & ADU in Homestead, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Homestead
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Home Additions & ADU: The Homestead Owner’s Guide

We build Kohler-outfitted home additions and ADUs across Homestead, and for a project of this size the number gets written down before anything else happens: $45,000 – $130,000 for a home addition, $90,000 – $220,000 for a detached or attached ADU, and $30,000 – $80,000 for a garage conversion. That’s the full installed range, with Kohler fixtures – the faucets, shower valves, and toilets you’d actually live with – specified by model number on the quote, not left to a showroom visit later. Rowan Construction Group is an independent contractor and is not affiliated with Kohler.

Call (844) 834-4248

How owners usually land here: a Kohler shower valve starts running cool halfway through a shower, the handle gets stiff or spins without resistance, the toilet tank won’t stop refilling at 2 a.m., or a faucet cartridge drips after three or four years in Homestead’s hard water. Those symptoms show up in the middle of planning an addition or ADU, and suddenly the fixture list is the part of the project nobody can price. This page handles that piece. Rowan Construction Group quotes a flat written price and a written scope before work begins, under The Haven Standard, and no change proceeds without a signed change order.

Which Kohler Models This Applies To

A tile setter installing wall tile in a shower

Kohler parts aren’t universal across their product families, and that’s where most of the mismatches happen. A Kohler shower valve typically comes from one series – the Rite-Temp/K-8304 pressure-balancing series, the older K-304, or the Katalyst-era thermostatic range – and each takes a different cartridge and rough-in depth. A toilet tank flange or fill valve that fits a Wellworth won’t fit a Santa Rosa, even though both are two-piece elongated bowls in the same showroom. Before you order anything, pull the model number off the tank lid (printed inside, not on the lid top) or off the valve trim plate. If it’s faded, photograph it; we can often identify the series from the trim silhouette and the rough-in measurement – the distance from the finished wall to the valve center, usually 1-3/4 to 2-1/8 inches on Kohler pressure-balance valves. Write that number down.

OEM vs. aftermarket: Kohler OEM cartridges and fill valves hold their tolerances longer in Florida’s water, which runs hard and often above 10 grains per gallon in South Miami-Dade. Quality aftermarket equivalents – the ones with matching brass bodies and a stated compatibility chart – are honest on Kohler’s older K-304 line where OEM parts have been slow to source. On current Rite-Temp trim, we’ve seen generic cartridges chatter within a year. Specify the OEM part number when the model is current; go aftermarket only when the chart names your exact model. We’re also set up for Kohler-adjacent work involving KraftMaid and Cambria, and can source Silestone if you’re pairing a bath addition with a kitchen line.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Kohler Home Additions & ADU Is Failing

These are the symptoms that tell us which part is gone, and which Kohler series you’re likely dealing with:

  • Temperature drifts mid-shower – The pressure-balance cartridge is worn, so the valve stops holding the set point when another fixture runs. If the drift started after the building’s water pressure rose above 80 psi, suspect the cartridge as the first failure point.
  • Handle spins or feels gritty before water moves – The stop or limit ring on the cartridge has stripped, or the splines are worn against the valve stem. This is a trim-and-cartridge job, but on Rite-Temp trim it needs the right cap and stem extension if the wall depth changed.
  • Drip from the spout after shutoff – Classic cartridge seat wear, usually first visible after three to five years on Homestead’s hard water. A steady drip is a seat issue; a burst of water at the spout when you turn the handle is a pressure-balance issue and worth a different repair.
  • Toilet runs continuously or refills at night – The fill valve or flapper has lost its seal. On Kohler two-piece toilets, a flapper that fits one bowl height won’t fit the next one over; the height differs by a half inch or more across the Wellworth, Santa Rosa, and Cimarron families.
  • Rust or scale at the escutcheon – The trim plate is pulling away from the wall, which usually means the rough-in depth or the tile membrane behind it has shifted. This one is worth a site visit, because it’s often a wall detail, not a valve failure.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A garage converted into a guest room and home office

Installed replacement pricing across Homestead, with Kohler-compatible parts specified by model:

  • Kohler shower valve cartridge or trim swap – $450 – $1,200
  • Kohler faucet cartridge or spout – $200 – $600
  • Kohler toilet fill valve and flapper set – $200 – $500
  • Walk-in shower installation (Kohler valve and trim included) – $4,500 – $12,000
  • Tub-to-shower conversion – $3,500 – $10,000
  • Bathroom remodel, fixtures sourced and installed – $9,000 – $28,000

The range is driven by the Kohler series (current Rite-Temp OEM parts cost more than a discontinued K-304 cartridge), how much wall has to open up to reach the valve, and whether the replacement is trim-only or a rough-in change. Every quote is a flat price with a written scope, so the parts line and the labor line are separate and visible. The work carries the 365-Day Done Right Promise, backed by The Haven Standard.

DIY or Call Us?

A few checks are safe and worth doing yourself: read the model number off the tank lid, photograph the valve trim, note whether the drip is at the spout or the handle, and measure your rough-in depth. Those four facts will get you a much better answer when you call.

Where it stops being a homeowner job: the valve body sits behind tile, and turning the cartridge out of a Kohler valve without the right puller strips the brass seat – which turns a cartridge swap into a rough-in replacement and a wall opening. Water going off means either shutting the building supply at a main you can reach or working the valve stop, and if those are corroded, that’s not a risk worth taking. The toilet tank has a shutoff that holds until it doesn’t; a slow failure there can run for hours. This is the point where we recommend a trained technician – and on every replacement we send out a background-checked, uniformed technician with a documented photo record, so you see the condition of the part that failed. Call us for a price before anything gets ordered.

FAQs

New architectural shingles with a clean valley

How long does a Kohler cartridge or fill valve last in Homestead? Expect five to seven years on a Kohler cartridge and four to six on a fill valve in South Florida water, roughly two to three years less than the same part in a softer-water city. Homestead’s water runs hard, and the mineral in it chews the cartridge seat faster than the original lifespan spec assumes. Call (844) 834-4248 for an exact quote, and a free estimate.

Can the part be repaired instead of replaced? A stiff handle, a drippy spout, or a toilet that refills too often is usually a cartridge or flapper swap, not a valve replacement – we repair the part before we quote the valve. If the valve body itself is cracked or the brass seat is stripped, repair won’t hold and a trim or rough-in replacement is the honest answer. The written quote names the part and the reason.

How long does the swap take? A cartridge or fill-valve replacement is a short visit – often within an hour if the part is on hand. A trim swap or a rough-in change that involves opening tile is a half-day to a full day, and an installation inside a home addition or ADU runs with the project schedule. We tell you the realistic window in writing, not on the phone.

How do you source the Kohler part? We identify the exact model from the tank lid or trim plate, pull the OEM part number for your series, and order it – we don’t carry parts on a truck. If the series is discontinued and OEM is unavailable, we tell you that in writing and quote the aftermarket equivalent that names your model, with the fit and warranty terms attached. Rowan Construction Group is independent of Kohler and sells no Kohler parts inventory; we specify and install.

Every part price above comes with the Free Second Opinion on a competitor’s written estimate – bring it and we’ll review it line by line at no charge.

Call (844) 834-4248 for a free estimate on your Kohler part or fixture project. You’ll want the model number before you dial; if you can’t find it, we’ll help you identify it from photos. A live person answers, and the written price arrives before any work starts.

Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
An open kitchen and dining area after a remodelA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Homestead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Homestead team

A local vetted partner works across Homestead and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 834-4248
Local Service Coverage

Request a Free Estimate in Homestead

Tell us what you need - Rowan Construction Group Homestead responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch