







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The Homestead Owner’s Guide
We handle Mr-Glass bathroom remodeling in Homestead with written pricing before any work starts. A full bathroom remodel in Homestead runs $9,000 – $28,000, and a small bathroom remodel runs $5,000 – $12,000. For a single component like a shower, vanity or tub-to-shower conversion, we quote the line item flat: shower replacement $3,000 – $8,500, walk-in shower installation $4,500 – $12,000, tub-to-shower conversion $3,500 – $10,000, and vanity installation $800 – $3,000. Rowan Construction Group Homestead is an independent remodeling contractor, not affiliated with Mr-Glass; we work on the fixtures and enclosures already in your home.
Most owners land on this page the same way. They find a fine crack propagating across a Mr-Glass shower door, or water pooling at the base of a framed enclosure after a heavy rain week in South Miami-Dade. Sometimes the glass is intact and the problem is the sealant, the track, or a hinge that has started to sag under the weight of a heavy door. Whatever the symptom, the first step is the same: identify the exact Mr-Glass model and part before anyone quotes a price.
Which Mr-Glass Models This Applies To

Mr-Glass bathroom products typically break into three families: framed and semi-framed shower enclosures, frameless glass doors and panels, and sliding or pivot tub-shower doors. Each family uses different hinges, rollers, handles and seal strips. A door from one frame profile will not accept the hinge from another, so the model number matters more than the glass thickness.
To identify what you have, look for a sticker or etched label on the frame header, the door hinge stile, or the top track. If the label is gone, measure the door height and width in millimeters, and note the frame finish (chrome, brushed nickel, oil-rubbed bronze). Take a photo of the hinge or roller where it mounts to the glass; that mounting pattern is the fastest way to key a part.
On the OEM-versus-aftermarket question: aftermarket hinges and rollers are widely available and honestly fine for a semi-framed enclosure, provided the load rating matches the door weight. For a frameless Mr-Glass door, where the hinge carries the entire panel, we recommend OEM or an equivalent rated for the door’s actual weight and glass thickness, because an under-rated hinge is the most common cause of a slow, dangerous sag. We source Mr-Glass-compatible components through vetted suppliers, and where a genuine Mr-Glass part is unavailable, we say so before quoting, not after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
What usually fails first in a Homestead bathroom is not the glass; it is the sealing and hardware around it.
- Water on the floor outside the shower: the sweep seal at the bottom of the door has hardened or shrunk. Florida’s humidity and the daily wet-dry cycle age the seal faster here than in drier climates.
- A door that no longer closes flush: a hinge has loosened from the glass or the frame has shifted. On frameless doors this is a weight problem and should be checked before the glass is stressed further.
- Cloudy or chalky glass: hard-water mineral buildup, common on Homestead municipal water, etching the surface. It is cosmetic until it hides a stress crack at the hinge point.
- Mildew and discoloration in the caulk line: failed silicone that lets water behind the tile flange and into the wall cavity. Left alone, this is how a $200 reseal turns into a $9,000 remodel.
- A visible crack originating at a hinge or handle hole: the glass is compromised at a drilled edge, which is the weakest point. Stop using the door and get it assessed; cracked tempered glass can release without warning.
If more than one of these is showing, the honest answer is usually that the enclosure is at the end of its service life and a replacement is the better spend. A bathroom remodel in Homestead covers the whole room and often resolves several of these at once.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the ranges we quote in Homestead, flat, in writing, before any work begins:
- Shower replacement: $3,000 – $8,500
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Bathroom vanity installation: $800 – $3,000
- Small bathroom remodel: $5,000 – $12,000
- Full bathroom remodel: $9,000 – $28,000
What drives the number: glass thickness and whether the panel is frameless, the finish and grade of the hardware, whether the tile and substrate behind the enclosure need repair, and whether the membrane and waterproofing are being redone. Every quote is a flat price with a written scope and a written warranty. No change proceeds without a signed change order. The 365-Day Done Right Promise covers the work: if it is not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself: read the model label, photograph the hinge and roller, test whether the door still hangs level, and look for soft or discolored caulk. Replacing a sweep seal or recaulking a clean, dry joint is within reach of a careful homeowner.
What we do not recommend as a DIY job is resetting a frameless door or swapping a hinge on a heavy glass panel. A frameless Mr-Glass door can weigh well over a hundred pounds; a hinge that lets go under that load can drop the panel. This is where DIY goes wrong, and where the risk to a person outweighs the savings. If the glass is cracked at a hinge or handle hole, stop using the door entirely.
If you’re within reach of a phone, call (844) 834-4248 and we’ll talk through what you’re seeing before you spend anything. A written price comes before any work, and your estimate is free. We’ll also give you a free second opinion on any written estimate you already have.
FAQs

Ten to fifteen years is a realistic expectation for the enclosure itself, but the hardware and seals usually need attention at the five-to-eight-year mark, and Florida’s humidity and hard water shorten that. The glass outlasts the fittings around it, which is why most replacements we quote are really hardware-and-seal jobs behind a perfectly good panel.
Often yes, if the glass is intact and only the sealant, sweep, or a single hinge has failed. A reseal or a hardware swap is a modest line item compared to a replacement. We assess the glass and the mounting points first; if a hinge hole or edge is cracked, repair is not the right call and we’ll tell you so plainly. Call (844) 834-4248 for an exact quote, free.
A single component swap, like a shower door or a set of hinges, is typically a partial-day job; a full enclosure replacement or a bathroom remodel runs longer depending on scope and tile work. We give you the written timeline with the written price, and we don’t start until you’ve signed. Call (844) 834-4248 to get the schedule for your Homestead project.
We identify your Mr-Glass model by label or measurement, then source OEM where the load demands it and vetted aftermarket equivalents where they’re honestly as good. We order nothing and quote nothing until we know the exact part, so the price on the page is the price on the invoice. Call (844) 834-4248 for a written quote.
We also work with KraftMaid, Cambria and Silestone on the cabinetry and surfacing side of a Homestead bathroom remodel. If you’re weighing a single part against a wider refresh, we’ll show you both numbers in writing and let the evidence decide. Call (844) 834-4248 for a free estimate and a written price before anyone picks up a tool.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












