







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Homestead Owner’s Guide
We handle Mr-Glass driveway and paver projects in Homestead, and the installed numbers land between $7,000 and $18,000 for a paver driveway, or $250 to $700 for sealing. Those are installed prices with materials and labor, and they come in writing before we lift a tool. Most Homestead homeowners don’t discover a problem with this part from a spec sheet. They discover it walking up the drive after a storm, when a run of pavers has heaved out of plane or the joints have washed open and dumped sand across the slab. Then they start searching for the model number under the paver edge and wondering whether their Mr-Glass course can be matched, patched, or has to come out.
Which Mr-Glass Models This Applies To

Mr-Glass paver systems run from the older single-thickness courses into the interlocking profiles more common on recent installs, and the differences matter the moment you need to match a piece. Compatibility comes down to three things you can measure yourself: the nominal thickness, the edge profile (square, chamfered, or beaded), and the joint width the existing course was laid to. Pull one intact paver from a corner or a border run, not the middle of a field where the bedding is compacted hard. Lay a straightedge across it and record the actual thickness in millimeters. Note whether the edges are flat or eased, and photograph the top texture next to a coin so scale is clear.
The OEM-versus-aftermarket call for Mr-Glass is honest trade work, not brand loyalty. A genuine Mr-Glass replacement piece guarantees color and profile continuity on the remaining runs. A quality aftermarket paver can do the job when the match is close and the repair is a small service area, and it’s usually the cheaper path. We don’t keep parts in stock and we don’t carry pavers on a truck. Every piece is sourced against your measurements, which is why the photo record matters: it’s the document that gets the right unit sent the first time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Driveway & Pavers Is Failing
- Pavers heaving or rocking underfoot. Rising and settling means the base beneath the course has lost compaction or taken on water. In Homestead’s high water table, that’s usually a drainage problem showing up at ground level, not a bad paver.
- Joint sand washing out after rain. Loose sand in the joints lets pavers shift and lets weeds take hold. It often points to a missing or failed edge restraint, the border that stops the course from spreading.
- Standing water or soggy spots after a storm. Water pooling on or beside the drive means the slope or the drainage outlet is wrong. South Florida rainfall exposes this fast, and it’s the root cause behind most paver settling.
- Efflorescence: the chalky white film. That powder is mineral salt migrating to the surface through moisture. It can be cleaned, but if it returns, moisture is still moving through the system and needs addressing.
- Cracked or chipped pavers at the driveway apron. The apron is where vehicles load the system hardest. Repeated cracking there usually means an edge restraint or bedding failure, not an isolated bad unit.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
| Scope | Installed range in Homestead |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway (comparison) | $4,500 – $12,000 |
The range moves with square footage, base prep depth, edge restraints, and how much of the existing course is reusable. A small repair on a sound base sits near the low end; a full re-lay on blown-out bedding runs high. Our numbers are flat written prices with the scope spelled out, and the warranty on the work is printed, not verbal. No work proceeds on a change until a change order is signed, which is how projects finish within a few percent of the number you agreed to. If you have a competitor’s written estimate, we’ll review it line by line at no charge.
DIY or Call Us?
Some of this is genuinely checkable on your own, and it’s worth doing before you call. Look for loose joint sand, snap a photo of water pooling after rain, measure and document one paver, and note where the drive meets the street. Those observations speed up a real quote.
What we don’t recommend is re-bedding or re-laying the course yourself. A driveway paver system fails from the base down, and pulling the surface without fixing the sub-base, slope, and edge restraint just puts the problem back on display. Compacted base prep, correct drainage fall, and restraint that holds under vehicle load are the parts that take experience to get right. If you’re unsure what you’re looking at, call us at (844) 834-4248 and we’ll give you an honest read.
FAQs

A well-installed paver system lasts 20 to 25 years or more, and in Homestead the base and drainage decide that lifespan more than the paver itself. Florida rain and a high water table stress the sub-base, so a properly drained, restrained install outlasts a cheap one every time. Call (844) 834-4248 for an exact quote on your drive; estimates are free.
Often yes. Localized settling, washed-out joints, or a damaged apron can be repaired by lifting the affected run, correcting the base, and relaying matched pavers. If the failure is widespread or the base is gone, replacement is the honest answer. We’ll tell you which applies after a walk of the site.
A small repair of a run or an apron is typically a one-to-two-day job, depending on weather and how much base correction is needed. Full replacement runs several days and we schedule it around rain. We confirm the timeline in the written scope before work starts.
We match against your measurements and photos: nominal thickness, edge profile, joint width, and color. Genuine Mr-Glass replacement pieces guarantee continuity; a quality aftermarket match is the cheaper route when the repair is small. We don’t stock parts, so each piece is sourced to your specifics. We also work with KraftMaid, Cambria, and Silestone on other trades. Call (844) 834-4248 for a free second opinion on any written estimate.
If your Mr-Glass driveway or paver course in Homestead is heaving, washing out, or holding water, call Rowan Construction Group Homestead at (844) 834-4248 for a free estimate. You’ll get a written price and a written scope before anything starts, backed by our 365-Day Done Right Promise. We install and repair paving across Homestead, and our technicians have up to 19 years of experience. We’re an independent service provider, not affiliated with Mr-Glass.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












