







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Homestead Owner’s Guide
We install and repair Sterling driveway and paver systems in Homestead, and most full paver driveway jobs here land between $7,000 and $18,000 installed, with smaller repairs and re-leveling priced far lower depending on square footage. We can usually get a written price to you the same day you call, and the work itself is scheduled around your Homestead property, not a waiting list. Rowan Construction Group Homestead is an independent contractor and is not affiliated with Sterling.
You usually find out something is wrong the same way everyone does: a paver lifts at the garage apron after a hard rain, or the joint sand washes out along the street edge and the whole run starts shifting a quarter inch at a time. Sterling makes modular paver and driveway edge systems, so what fails is rarely the paver face. It’s the bedding layer, the edge restraint, or the base underneath, and those are what we check first.
Which Sterling Models This Applies To

Sterling paver lines come in interlocking profiles (their rectangular and tumbled-edge series), and the model matters less than three measurements: paver thickness, joint width, and the edge-restraint profile. Measure a failed paver’s thickness with a tape across the face edge. Most Sterling residential profiles sit in a 2 3/8-inch to 2 3/4-inch range, and a replacement that’s even 1/8 inch off will sit proud and rock underfoot. That measurement, plus the color name stamped on the pallet or a photo of the full pattern, is enough to match a replacement.
On the OEM-versus-aftermarket question for Sterling specifically: the pavers themselves are worth matching to the original line because color and dimension change between production runs. The bedding sand, joint sand, and edge restraint are commodity parts, and a quality equivalent from a supplier like Belgard or Techo-Bloc works fine. We say that plainly because it saves you money on the parts that don’t need a brand name. We don’t claim Sterling OEM stock, and no one carries paver parts on a truck, so sourcing takes a real order. If you’re also matching KraftMaid, Cambria, or Silestone finishes elsewhere on the property, we handle those brands the same way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Pavers rocking or lifting at the garage apron. This usually means the bedding layer has washed out and the base wasn’t compacted properly where the driveway meets the slab. South Florida rain finds that seam fast.
- Joint sand washing out along the street edge. Missing sand lets water into the joints, and once water sits under the pavers, freeze-free Homestead winters don’t save you, the soil simply softens and shifts.
- Edge restraint separating from the field. When the plastic or aluminum edge pulls away, the outer row spreads outward and the whole run loosens behind it. This is the single most preventable paver failure.
- Weeds and ant mounds pushing up between pavers. Growth in the joints signals a failed sand layer and trapped moisture, not just a cosmetic nuisance.
- Standing water that lingers 24 hours after a storm. Poor grading or a settled base, and it’s the one problem that gets worse every rainy season in Homestead.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices in Homestead depend on the square footage and how much base needs rebuilding. Expect paver driveway installation at $7,000 to $18,000, a full driveway replacement at $5,000 to $14,000, and resealing at $250 to $700. A paver patio runs $3,500 to $11,000. What drives the range: whether we reset pavers on the existing base or remove and recompact the aggregate base, the edge-restraint replacement, and drainage corrections.
Our quote is parts plus labor, written line by line, before anyone picks up a tool. That’s Clause 1 of The Haven Standard, and it’s why change orders have to be signed before work moves forward. The work carries the 365-Day Done Right Promise, and you get a photo record of what we found under the pavers as a standard deliverable.
DIY or Call Us?
Here’s the honest split. You can safely sweep fresh joint sand into a stable, level paver field, pull weeds, and reseal a driveway that isn’t heaving. Stop there. Rebuilding the base, resetting a settled field, and re-anchoring edge restraint is heavy, compacted work. Get the base compaction wrong and the pavers you paid for shift again after the next Homestead rainy season, so the DIY saving disappears twice. A paver field that’s lifting under load can also hide a grading problem that keeps water against your foundation, which is the kind of thing worth having an experienced crew look at. Our technicians have up to 19 years of experience, and we’ll tell you plainly if a smaller repair is all you need.
Call (844) 834-4248 for a free estimate. We’ll confirm whether you’re looking at a sand-and-seal refresh or a base rebuild, and put the number in writing.
FAQs

A properly installed paver field lasts 20 to 30 years; what fails first is the bedding and joint sand, often within 5 to 8 years in Homestead’s heavy rain and sandy soil. The pavers outlast the base under them, so a re-sand and edge check every few years keeps the surface where it belongs. Call (844) 834-4248 and we’ll assess the base before recommending anything.
Yes, most failed Sterling paver runs can be repaired rather than fully replaced. Lifting the settled field, recompacting the base in that zone, resetting the pavers, and refilling joints fixes the common failures, and it’s the less expensive path when the pavers themselves are sound. We’ll tell you which one your driveway actually needs after we look. Call (844) 834-4248 for a free estimate.
Most driveway paver projects in Homestead take two to four days, depending on square footage and how much base rebuilding is needed. A single-zone reset is often a one-day job. We schedule around weather, since South Florida afternoon storms can push a reset back a day, and we’ll give you the timeline in the written quote. Call (844) 834-4248 to get that number.
We match on thickness, joint width, profile, and color name from the pallet or a photo, then order through our vetted supplier network so the replacement lines up with your existing field. We source modular and edge components from brands like Belgard and Techo-Bloc when an exact OEM match isn’t practical, and we say so up front. Call (844) 834-4248 and bring whatever label or photo you have.
Call (844) 834-4248 for a free estimate. We’re Rowan Construction Group Homestead, all work is quoted in writing before it starts, and we’re happy to give a free second opinion on any written estimate you’ve already received.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












