







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Home Additions & ADU: The Homestead Owner’s Guide
The quick answer: A Tamko-compatible home addition or ADU in Homestead runs $45,000 – $130,000 installed, depending on square footage, foundation type, and whether you’re adding a full ADU. We install Tamko roofing and weather-barrier systems on the additions we build, and we quote a flat written price before any work starts. Rowan Construction Group is an independent contractor and is not affiliated with Tamko.
Most owners don’t come to this page looking for a “part” in the garage-door sense. They come because something on their addition or ADU is telling them it’s done: a stain blooming across the ceiling of the new room, a musty smell in the converted garage, a Tamko shingle course lifting along the tie-in where the addition meets the original roofline. In Homestead, that call usually comes after a rainy season has had its way with a roof-to-wall junction that was never flashed right. The part that failed is rarely the shingle itself. It’s the integration.
Key Takeaways
- Tamko on an addition or ADU is a system, not a single part: shingles, underlayment, flashing, and the tie-in to the existing structure.
- Installed addition pricing in Homestead: $45,000 – $130,000. ADU construction: $90,000 – $220,000. Garage conversion: $30,000 – $80,000.
- The failure point on most Homestead additions is the tie-in and flashing, not the Tamko shingle field.
- Miami-Dade and Broward product approval matters here. We verify the specific Tamko assembly carries the approval your permit needs.
- You get a written flat price, a signed change order before any scope change, and a photo record of every visit.
Which Tamko Models This Applies To

Tamko’s residential lines break into a few families you’ll see on Homestead additions: Heritage (their flagship laminated asphalt shingle, commonly in 30-, 40-, and 50-year designations), Titan XT (a heavier, impact-oriented laminated shingle), and MetalWorks for the steel-panel look some Homestead additions use to match an existing metal roof. Underlayment and weather-barrier products like Tamko’s synthetic lines sit beneath all of them.
The compatibility gotcha that bites people: the “lifetime” or “50-year” number on a Tamko bundle is a limited warranty designation, not a measured lifespan in South Florida sun and salt air. In Homestead’s heat and humidity, a laminated shingle that performs 25-plus years up north is doing well to reach the low end of its design life if attic ventilation is poor. The other gotcha is the flat, uniform look of Tamko’s lines across past production runs; matching a repair shingle to a 12-year-old weathered field is nearly impossible, so most additions get a full re-roof of the tie-in zone rather than a spot patch.
To identify what you actually have, check three places: the inside of the attic near the ridge for a Tamko bundle wrapper (installers often staple it to a rafter), any paperwork in the permit file at the city, and the shingle profile itself against Tamko’s current sample boards. We measure the exposure and course count rather than trust a label alone. When we source, we can order genuine Tamko or a quality aftermarket equivalent depending on what the assembly and the permit call for, and we tell you which and why in the written scope. We also handle KraftMaid, Cambria, and Silestone on the interior side of an addition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Home Additions & ADU Is Failing
- Water staining on the addition ceiling near the tie-in. This almost always traces to failed step flashing where the new low-slope roof meets the original wall, not the Tamko shingle field above it. The shingle sheds water fine; the junction lets it in.
- Lifted or creased shingle tabs along one edge. Wind uplift at the rake edge, common after a Homestead storm, means the starter course or edge metal was under-fastened. The shingle isn’t defective; the installation edge detail was.
- Musty smell or high humidity inside a converted garage. Garage conversions fail on moisture, not roofing. The slab and the wall base need a vapor path handled correctly, or the new room smells like a basement within a season.
- Soft or spongy decking felt underfoot on the new roof. Deck rot from a long-running small leak. By the time you feel it, the sheathing panel needs replacement, and that’s a change order we’ll put in writing before touching it.
- Cracks at the addition-to-house seam, inside or out. Foundation settlement or a difference in movement between the new footing and the original slab. Cosmetic if caught early, structural if ignored.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest number, in dollars, so you can screenshot it and compare:
| Scope | Installed price range (Homestead) |
|---|---|
| Home addition (per project) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
For a failing roof assembly on an existing addition, the repair scope is what moves the number: re-flashing a single tie-in is a small job; re-roofing the addition with correct underlayment and edge detail is a mid-range one. What drives the range on a full addition is square footage, foundation type (slab vs. raised vs. augmented), and how much of the existing structure has to be opened up to tie in properly. We quote parts and labor as one flat written price under Clause 1 of the Haven Standard, with a written scope and a written warranty, and no change proceeds without a signed change order. The workmanship warranty covers our installation, not the Tamko material manufacturer warranty, which is a separate document we hand you.
DIY or Call Us?
Some things you can safely check yourself. Look in the attic for the bundle wrapper to confirm your Tamko line. Feel for soft decking. Photograph any water stain and trace it back to the nearest roof junction. Watch it during the next heavy rain to see where it enters.
Where DIY goes wrong: re-flashing a roof-to-wall tie-in. Getting step flashing, housewrap, and the shingle course to shed water in the correct order is a sequence, and a homeowner working from a video usually gets the layers reversed or skips the kick-out. It looks sealed, then leaks after the first real storm. Roof work at height on a two-story addition is also where a weekend project turns into an emergency room visit. If the problem is at the tie-in or on the roof deck, that’s a trained professional’s job. Call (844) 834-4248 and we’ll do a free second opinion on any written estimate you already have, line by line, at no charge.
FAQs

How long does a Tamko shingle assembly last on a Homestead addition? Expect the low end of the stated design life in South Florida conditions. A “50-year” Tamko Heritage shingle realistically performs closer to 20-25 years in Homestead’s heat and humidity unless attic ventilation is excellent, so the number on the bundle is a warranty designation, not a measured clock. Call (844) 834-4248 for a free estimate on your addition’s roof assembly.
Can a failed addition tie-in be repaired instead of re-roofed? Often, yes. If the Tamko shingle field is sound and the leak sits entirely at the flashing junction, we can re-flash the tie-in and replace only the affected courses. A full re-roof becomes necessary when the decking is soft or the underlayment has failed broadly. We’ll tell you which in writing, with photos, after we look.
How long does the swap or repair take? A flashing repair on an addition tie-in is typically a one-day scope. Re-roofing an addition runs several days to a week depending on square footage and weather. Full addition builds run weeks to months, and we put the schedule in your written scope before anyone picks up a tool.
How do you source the Tamko part for my addition? We confirm your existing Tamko line from the attic label, the permit file, or a physical profile match, then order genuine Tamko or a documented quality equivalent depending on what the assembly and Miami-Dade product approval require. We never claim parts on hand; we source to your specific model and tell you the lead time up front. Call (844) 834-4248 for a free estimate.
Whether you’re adding a room, converting a garage, or chasing a leak at the tie-in, Rowan Construction Group Homestead will give you a written flat price before any work starts, a signed change order before any scope change, and a photo record when the crew leaves. Call (844) 834-4248 for a free estimate.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












