







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Kitchen Remodeling: The Homestead Owner’s Guide
Therma-Tru kitchen remodeling in Homestead typically runs $14,000 – $45,000 installed, and that number depends far more on what your Therma-Tru door and entry system is asking for than on the door itself. If you’ve got a Therma-Tru exterior door off the kitchen that’s sticking, letting in humid Gulf air, or showing daylight around a frame that no longer seals, you’re in the right place. We install and restore Therma-Tru-compatible systems across Homestead, price the scope in writing before anyone lifts a tool, and we’re an independent contractor, not affiliated with Therma-Tru. Owners usually find the problem the same way: a swollen frame after a wet summer, a door that won’t latch twice in the same week, or a callback from an insurance adjuster. Call (844) 834-4248 for a free estimate.
Which Therma-Tru Models This Applies To

Therma-Tru builds fiberglass entry and patio systems under several lines, and the part you need depends on the door’s construction, not its color. The Classics, Smooth-Star, and Fiber-Classic lines use different frame and sill profiles, and a patio door from one line won’t accept a slab or sill from another. Before we order anything in Homestead, we pull the model number off the door’s edge label and measure the rough opening, the slab width, and the sill height independently, because a previous owner’s door may have been replaced with a mismatched slab. That mismatched slab is the most common compatibility gotcha we find: the label says one series, the frame says another, and neither the hardware hole-set nor the weatherstripping lines up.
When it comes to OEM versus aftermarket, the honest answer is that OEM gets you a guaranteed fit and aftermarket gets you a lower number, and the difference matters more on a door than on a refrigerator. A factory Therma-Tru sill or frame section will drop into the same mortise and match the existing finish schedule; a universal aftermarket equivalent may need shimming, a different hinge orientation, or a re-cut of the frame, and that labor eats the savings. We source through established distributors and list the part and the labor as separate line items on the written quote, so you see what’s OEM and what’s aftermarket before you sign. If you also have cabinets or counters in the plan, that same sourcing depth covers KraftMaid, Cambria, and Silestone, and it’s why the number on the page stays honest instead of padded.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Kitchen Remodeling Is Failing
- A frame that swells and sticks after heavy rain. Fiberglass door slabs hold up well in Homestead’s humidity, but an MDF or wood frame section will absorb moisture and swell shut a door that was fine in March. That swelling is a frame and sill failure, not a door failure.
- Daylight around the edges when the door is latched. Weatherstripping or the sill gasket has compressed or pulled loose, and in Homestead’s wet season that gap drives a lot of air and moisture into the kitchen, not just a draft.
- A door that won’t latch without a shove. Most of the time this is the frame settling or a hinge plate that’s stripped its screws, not a bad lock. The lock is the symptom; the frame or hinge is the cause.
- Rust or bubbling at the threshold. The sill pan or flashing has failed and water is sitting where it shouldn’t. Left long enough, it rots the subfloor at the threshold, which turns a door fix into a floor repair.
- A slab that’s warped or delaminated. Fiberglass slab cores are built to shed water, but a slab that’s been exposed to years of sun and wind-driven rain can delaminate at the stiles, and once that starts it won’t come back.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

The kitchen and entry work we quote in Homestead runs $14,000 – $45,000 for a full kitchen remodel, and the Therma-Tru door system is one line item inside that larger number, not the whole ticket. For owners who just need smaller pieces, these are the installed ranges we quote:
| Scope | Installed Range (Homestead) |
|---|---|
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range: door and frame size and series, whether the rough opening needs to be modified, whether the subfloor at the threshold is sound, and how much finish work is needed after the swap. We list parts and labor as separate line items, so you see the door cost and the install cost, not one blended number. The work carries our 365-Day Done Right Promise: if the install isn’t right, we make it right. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Call (844) 834-4248 for an exact quote.
DIY or Call Us?
Some of what fails on a Therma-Tru door you can safely check yourself: look for daylight around the edges with the door closed and latched, feel the weatherstripping for compression, check the threshold for rust or softness, and look for gaps at the hinge plates. That tells you what’s likely wrong before you call. What we don’t recommend is trying to re-cut or re-shim a frame, or replace a patio door slab on your own. Replacing an exterior door slab is a two-person job on a loaded spring hinge in many configs, the frame must go in square and plumb or it will leak, and getting it wrong in Homestead’s wet season means water in the wall, not just a draft. That’s not a scare tactic, it’s just the physics of a door hung out of square. If you’re unsure, call us and we’ll tell you what to check and what to leave to a crew, at no charge. Call (844) 834-4248 for a free estimate.
FAQs

A well-installed Therma-Tru fiberglass door system should hold up 20 to 30 years in Homestead’s climate, but the frame and sill are the parts that age first, and most of the failures we see are on doors that are 10 to 15 years old. UV and wind-driven rain hit the frame and weatherstrip harder than the slab. Call (844) 834-4248 and we’ll tell you how much life is left.
Often, yes. Weatherstripping, sill gaskets, hinge plates, and threshold flashing can be replaced on their own, and we’ll tell you honestly when that’s the cheaper fix. A frame that’s swollen or a slab that’s delaminated usually can’t be repaired, only replaced. Call (844) 834-4248 for a free second opinion and we’ll review any written estimate line by line.
A weatherstrip, sill, or hardware replacement is typically a single visit. A full door-slab or frame replacement is usually a one- or two-day job depending on the rough opening and finish work, and we schedule it around your kitchen calendar, not ours. Call (844) 834-4248 and we’ll put the timeline in writing.
We order through established distributors and match the part to your door’s model label and measured dimensions, not to a guess. That’s why we pull the label and measure before we order, and why our written quote shows the part as a line item. We don’t claim to carry parts on a truck; we claim to get the right part to your door. Call (844) 834-4248 with your model number and we’ll get you a written price.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












