







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Homestead Owner’s Guide
If you own a home with a Wellborn-pattern driveway or paver system, the part that most often fails is not the paver itself but the bedding layer and edge restraint underneath it. In Homestead, replacing or re-securing a failed paver section typically runs $700 to $2,800 for a small repair, with full paver driveway installation in the $7,000 to $18,000 range, and most straightforward repairs can be scheduled within a few business days. Rowan Construction Group Homestead is an independent contractor and is not affiliated with Wellborn; we source Wellborn-compatible pavers, restraints, and base materials and install them to the manufacturer’s spec.
Owners usually find out something is wrong the same way we do: a section of pavers starts rocking underfoot after a heavy rain, a rut appears where the car tires track, or the joints between pavers begin shedding sand faster than normal. That pattern – movement below the surface, not wear on top – is the signature of a failed base, and it tells you more about the repair than the surface ever will.
Which Wellborn Models This Applies To

Wellborn paver products are sold in named series, and each series carries its own nominal thickness (the common residential ranges sit around 2⅜ inches for standard pavers and up to 3⅛ inches for heavier-duty units), its own face pattern, and its own edge-restraint profile. Matching the wrong thickness or series to an existing run is the single most common compatibility error we find on Homestead driveways, because a paver that is even a sixteenth of an inch off shows at the joint line and stresses the bedding layer.
To identify what you have, look for a stamped or cast series marking on the paver face or on the edge channel, then measure the actual thickness with a caliper at three points – not a tape measure at one. Note the color family and finish as well, because dye lots shift across production runs and a replacement batch from a different lot will read as a mismatch in bright Florida light. Compare that against the original installation paperwork if the previous owner left it; if not, the physical measurements are the reliable record.
The OEM-versus-aftermarket decision matters here. Wellborn’s own series-matched pavers are the only way to guarantee an invisible color and dimension match on a repair. A quality aftermarket equivalent in the same thickness and a close color can work for a larger reset where the visual seam is less critical, and it usually costs less. We quote both, side by side, in writing, so you can see the trade-off before you commit. The same sourcing discipline covers cabinets from KraftMaid and Wellborn, stone from Cambria and Silestone, and the rest of the fifty-plus brands we work with.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
- Rocking or loose pavers. Individual units move underfoot because the sand bedding beneath them has washed out and the base has lost compaction – common on Homestead driveways where heavy summer rain pushes water into under-drained joints.
- Rutting along the tire paths. A shallow trench forms where the car parks or turns, meaning the base aggregate was undersized for the load or was never compacted in lifts. It gets deeper with every rainy season.
- Joint sand washing out repeatedly. Sand that disappears within weeks of a refill signals missing or failed edge restraint, not a sand problem. The pavers are spreading outward at the perimeter.
- Sunken or heaved sections. A dip or rise in one area points to localized subgrade movement or a buried root pushing up from below, both of which require resetting the base, not just relaying the top course.
- Weed growth and efflorescence at the seams. Persistent weeds in the joints mean the sand layer has opened up; white efflorescence staining often follows moisture trapped under the surface, which is a drainage clue as much as a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Homestead is quoted as a flat written number before any work starts, and it breaks out parts and labor line by line. The table below reflects our market-calibrated ranges.
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves the number: total square footage, paver series and thickness, the depth of failed base that has to come out, edge-restraint replacement, and whether the subgrade needs correction. We source the pavers, restraints, and base materials to the series spec and include every line in the written scope. The work carries our 365-Day Done Right Promise, and no change proceeds until you sign a change order.
DIY or Call Us?
A homeowner can safely pull a single loose paver by hand, measure its thickness, and photograph the base underneath to see whether the bedding sand is gone or the aggregate is soft. That is useful information and it costs nothing. Where DIY goes wrong on pavers is the base: relaying the top course over a failed bedding layer looks fine for one rainy season and then moves again, and resetting edge restraint correctly takes compaction, the right aggregate in proper lifts, and a plate compactor most homeowners do not own. If a vehicle drives on it, the margin for a base that is a little off is zero. Call (844) 834-4248 with your measurements and a photo and we will tell you honestly whether it is a repair or a reset.
FAQs

A correctly installed Wellborn paver driveway typically lasts 25 to 50 years, but the base and edge restraint underneath it decide the outcome, and those fail sooner in South Florida’s rain-heavy summers and warm-year-round conditions. Expect the bedding layer to need attention well before the pavers themselves wear out. Call (844) 834-4248 for an exact quote – estimates are free.
Yes, in most cases a localized section can be reset without replacing the whole driveway, as long as the surrounding pavers are sound and the failure is confined to one run. If the base has failed across the whole pour, a partial repair is money spent twice. We will tell you which one you have. Call (844) 834-4248 for an exact quote – estimates are free.
A single-section repair is usually a one- to two-day job, while a full paver driveway replacement runs several days depending on square footage and base work. You get a written timeline with the written price before work begins, so there are no surprises. Call (844) 834-4248 for an exact quote – estimates are free.
We identify the series, thickness, and color lot from the paver markings and your measurements, then source the Wellborn-compatible material to that spec, quoting OEM and quality aftermarket options side by side. Every visit includes a documented photo record of what we found and what was installed. Call (844) 834-4248 for an exact quote – estimates are free.
Bring us a competitor’s written estimate and we will review it line by line at no charge – the Free Second Opinion is a standing offer, not a sales tactic. To get your flat written price before anyone picks up a tool, call Rowan Construction Group Homestead at (844) 834-4248 for a free estimate.
Written by the team at Rowan Construction Group Homestead, serving Homestead and nearby areas.












