







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Homestead Homeowners Choose CGI Construction
We provide independent CGI construction service in Homestead, and what sets our CGI work apart is that we quote repair versus replacement cabinet by cabinet, source CGI boxes and door fronts through distribution rather than a dealer network, and hand you a flat written price before a single cabinet comes off the wall. Rowan Construction Group Homestead is not affiliated with, authorized by, or sponsored by CGI. We’re an independent provider, and we say so on every quote.
That independence is the point. Because we don’t sit inside CGI’s dealer program, we can price a CGI shaker run against KraftMaid on the same layout and show you which line fits the room and the budget. Our technicians have up to 19 years of experience, we’re licensed and insured, and every Homestead visit ends with a documented photo record of what we found. Call (844) 834-4248 for a free estimate.
Why Trust Rowan Construction Group Homestead for Your CGI Construction?

CGI cabinetry has a particular set of habits, and knowing them is most of the job. Thermofoil faces lift at the bottom edge near a sink base long before the box fails. RTA joints loosen when the floor under them isn’t level and nobody shimmed. A drawer glide on stock slide hardware gives out after a few seasons of humidity cycling while the dovetail drawer box itself is still square and sound.
Our technicians have handled those patterns across 4,000-plus projects since 2007, and they know which CGI failures are cosmetic and which mean the panel is done. When a repair is the right call, we fit quality aftermarket hinges and full-extension glides (Blum-style) that often outlast the stock hardware CGI ships with. Every part we spec is OEM-compatible, so a repair doesn’t put your warranty at risk through a mismatched hinge pattern or an off-spec glide screw spacing.
Under the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. You also get a Free Second Opinion on any written estimate you bring us – competitor’s or otherwise – reviewed line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Homestead
Here are the CGI-specific failures we see most often in Homestead homes, tied to the actual cause and what it usually means for the cabinet.
- Thermofoil and laminate door faces lifting at the edges. On CGI semi-custom thermofoil doors, the vinyl face tends to peel first at the bottom rail of sink-base and range cabinets, where steam and moisture collect. The box behind it is often fine. If the lift is a single door, replacement of that face is the honest fix; if it runs the length of the wall, a full run replacement is usually cheaper than patching door by door.
- RTA cabinet boxes racking or joints loosening. CGI Ready-to-Assemble shaker and slab lines depend on the install being level and shimmed correctly. When a cabinet is set on an unlevel floor and clamped down instead, the joints work loose and doors go out of square. The fix is re-squaring and re-fastening the box, not a new cabinet, unless the panel has cracked at the fastener.
- Particleboard or MDF box panels swelling around the sink and dishwasher bay. A slow supply-line or drain leak that goes unnoticed for a season will swell a CGI box panel at the bottom and along the toe kick. Once the panel has swelled, it won’t come back. That’s the one case where replacement genuinely beats repair.
- Soft-close hinges and drawer glides sagging or failing. Stock slide hardware on CGI cabinets wears out faster than the dovetail drawer box does, and Homestead’s humidity cycling speeds that up. Quality aftermarket full-extension glides are the right call here, and they’re a fraction of the cost of new cabinets.
- UV and humidity wear on painted CGI doors facing a sun-heavy window wall. South Florida sun and humidity are hard on painted finishes, and Homestead sits in it year-round. A painted door that has checked or gone chalky on one face can be re-shot or replaced without touching the rest of the run.
CGI Parts & Our Repair-vs-Replace Approach

For CGI cabinetry, OEM parts aren’t always the better part. When boxes and faces are still sound, quality aftermarket hinges and full-extension glides outperform the stock hardware – that’s the honest call, and we say so. When box panels have swelled or thermofoil is peeling across a whole run, patching costs more than replacing, and we quote it that way.
We source CGI boxes and door fronts through distribution for each job, so parts timelines vary by door style and finish – we won’t pretend a warehouse of them sits down the street. Which means the quote is built around what actually has to be ordered, and you see that on the written price before work starts.
Our rule is per-cabinet. A drawer that won’t stay closed because the glide failed doesn’t need a new cabinet. A sink base with a swollen floor panel does. Call (844) 834-4248 and we’ll walk through which is which on your CGI kitchen.
CGI Service Pricing in Homestead
| Service | Typical Range in Homestead |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
Every one of those numbers is a flat written price with a written scope before any work begins – not a range we refine after demo.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We open the cabinet, check the box panels for swelling at the sink base and dishwasher bay, test every hinge and glide, and photograph the condition of the substrate and hardware before anything comes apart. That photo record is yours.
- 2
Written repair-or-replace call. Per cabinet, we quote the fix and the alternative, so you see the real cost of each on paper. That’s the number you sign against.
- 3
Repair or install. Repair means quality aftermarket hardware matched to the CGI hinge pattern, re-squared boxes, and re-sealed or replaced sink bases. Installation means new CGI boxes leveled and shimmed correctly – the step that prevents racking in the first place.
- 4
Test and adjust. Every door and drawer cycled, soft-close checked, alignment set. On a Homestead install, we also verify the sink base and dishwasher bay are dry before we close up.
- 5
Warranty and handoff. Written warranty in hand, photo record delivered, and the 365-Day Done Right Promise attached to the work. If it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Homestead
We work with CGI Ready-to-Assemble (RTA) shaker and slab cabinet lines, CGI all-wood framed cabinet boxes with dovetail drawer construction, and CGI semi-custom door styles in painted and thermofoil finishes. Our technicians also handle the surrounding work these lines depend on – cabinet installation and refacing, countertop installation in Cambria, Silestone, or quartz, and backsplash work that ties the run together. This is independent service; we install and repair CGI cabinetry, we don’t sell it as an authorized dealer. Homestead homes from older ranch rebuilds to newer CBS subdivisions all get the same per-cabinet assessment.
We Also Service These Brands
CGI isn’t the only line we know, and that matters when one brand’s door style or box construction doesn’t fit a given layout. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. Having more than one brand in reach means the written quote reflects what actually fits the room instead of what a single dealer needs to move.
FAQs – CGI Construction Service in Homestead

No. We’re an independent CGI-focused construction provider, not an authorized CGI dealer, and we’re not affiliated with or sponsored by the manufacturer. We source CGI components through distribution and service the cabinetry on its own merits.
We use OEM-compatible parts and, where it serves you better, quality aftermarket hardware from brands like Blum for hinges and full-extension glides. When boxes and faces are sound, aftermarket hardware usually outlasts the stock slides. We’ll tell you which is the right call for each cabinet on the written quote.
Hardware-only repairs and single-door replacements are often a single visit. A sink-base rebuild or a full cabinet installation depends on lead time for the specific CGI door style and finish, which we confirm before the job is scheduled. You’ll see the timeline on the written price. Call (844) 834-4248 for an exact timeline.
We cover CGI Ready-to-Assemble (RTA) shaker and slab lines, all-wood framed boxes with dovetail drawers, and semi-custom door styles in painted and thermofoil finishes. If you’re unsure which line you have, the photo record from the diagnosis visit usually settles it.
Repairing or installing CGI cabinetry with OEM-compatible parts doesn’t void the manufacturer’s warranty, and it’s our practice to work warranty-safe. We don’t claim to administer CGI’s warranty – we document what we find so you have the record if you file a claim.
Cabinet installation in Homestead typically runs $4,000 – $13,000, countertop installation $2,000 – $6,500, and a small kitchen remodel $9,000 – $20,000. The exact number depends on the door style and how many boxes need repair versus replacement. Call (844) 834-4248 for a written quote – estimates are free.
Book Your CGI Service in Homestead, FL
Whether it’s a peeling thermofoil door, a drawer glide that’s given out, or a full CGI cabinet run you want installed level and shimmed right, Rowan Construction Group Homestead quotes it in writing before anyone picks up a tool. Call (844) 834-4248 for a free estimate. Licensed and insured, background-checked technicians, and a documented photo record on every visit.
Written by the team at Rowan Construction Group.












